hP Series

Adaptive Crowning

To avoid and compensate any deflection of the frame, a triple bottom table is supplied. This solution allows installing the Adaptive Crowning with the advantage to measure the ram deflection and to compensate in real time, in order to manage the material variability.

Two precision sensors adapt in real time to the ram deformation: the first one detects the ram yield from the beginning of the bend, the CNC activates the cylinders in the lower ram until the reading of the second sensor is equal to the first one.

This leads to the complete control at maximum precision and absolute repeatability, with any material.

Reflex Compensation System

During the bending, the side frames are subject to strong forces that cause the deformation of the throat area. This effect is shown in the top beam moving away from the lower beam, compromising the accuracy of the control systems.

Reflex controls the deformation of the side frames thanks to different machine sensors and its hydraulic circuit.

The position of the ram is always under control during the bending process to guarantee the repeatability of the angle, whatever the part length, thickness variations, part positioning and sheet characteristics.

From 200 ton to 1000 ton 

From 2000 mm to 12000 mm

Tandem configuration available

Genius configuration (tool change system) available for all hP sizes.